Replacing the IX-Pfas water filter

Replacing the PFAS water filter cartridge

Follow these steps to replace the cartridge in the Pfas water filter

• Step 1. Turn off the water (using the main tap or the shut-off valve)
• Step 2. Let the tap run into the sink
• Step 3. Turn the green flush tap on slightly and let the water run out through the hose (keep a small basin to hand)
• Step 4. Place the filter on the ground
• Step 5. Press down firmly on the top edge (the wide ring) of all sides
• Step 6. Press both black flaps down
• Step 7. Unscrew the top (it’s easiest to place the filter between your legs)
• Step 8. Pour any excess water into the sink
• Step 9. Remove the cartridge and place it in the bag provided
• Step 10. Insert the new cartridge
• Step 11. Tighten the top (Make sure that the ‘i’ mark is aligned with the mark on the filter, then tighten)
• Step 12. Turn the tap back on
• Step 13. Put the bag containing the old cartridge into the box and return it using the label provided. 
• Unscrew the top